MOS-FET output devices
Class-A full complementary front end
Modular construction
Stereo, parallel mono & bridged mono modes
LED level meters
Forced Front to back air-cooling
XLR and barrier strip inputs
Fuse-less short circuit protection
Perfect overload and square wave response
Turn-on delay
5 way Binding post for speakers
Strategically located transformer to reduce front-panel torsion
Output Power (per channel)
500 watts @4W, 300 watts @8W (both channels driven at 1KHz, < 0.1% THD)
1000 watts@ 8W, bridged mono; 1350 watts @4W, bridged mono
Continuous Power 475 watts @ 4W; 290 watts @8W (both channels driven at 20Hz – 20KHz, 0.1% THD)
Frequency Response 20 Hz – 20 KHz, ± 0.2 dB8 Hz – 100 KHz, ± 3.0 dB
Total Harmonic Distortion 0.007%, 1 KHz, 8W; 0.01%, 20 Hz, 8W; 0.05%, 20Hz-20KHz, 8W (at rated power)
Inter Modulation Distortion<0.007% SMPTE, <0.01% IHF (at rated power, 8W)
Output Hum and Noise-105 dB from full output (20 Hz - 20 KHz unweighted)
Damping Factor> 250 into 8 ohms <1KHz
Crosstalk -90 dB (20 Hz – 1 KHz)
Full Power Input Sensitivity 1.7 V RMS
Bandwidth 100 KHz
Slew Rate 50 V/μs
Rise Time 2μs 10%-90%
Voltage Gain 29 dB
Input Impedance 20 K ohms, balanced
Amplifier Protection Fuseless short-circuit protection, ultrasonic and RF protection, thermal protection
Load Protection Turn-on delay, DC fault protection, ultrasonic limiting
Cooling Forced air
Power 230-240 VAC, 50-60 Hz
Dimensions 19”(L) x 5.25”(H) x 16.5”(D)
Net Weight 28.0 Kg
Packed Weight 30.0 Kg approx.