sub 215sTM 
Subwoofer with SIC technology &

2 high power neodymium 15" loudspeakers

F E A T U R E S

The PULZ® Sub215S extends the usable range of any loudspeaker to 35Hz. Its compact format offers an ideal

companion to fixed or touring system. The SUB215S is equipped with two high power neodymium Audio 15” loudspeakers. TM SIC technology, Single Interactive Chamber, increases bandwidth and efficiency while reducing total volume of vented bass loudspeaker by combining rear and front load in the same volume. Because rear and front load do not work in the same frequency region, it is possible, with a special calculation layout, to fuse both functions in only one. In practice, SICTM technology, by using this new physical approach, virtually suppresses one of the two volumes and dramatically reduce the total size of vent loaded subwoofer. When used with CX15 or CX15S enclosures, the Sub215S is ideal for medium size front of house Multiple Sub215S can be operated for large front of house.

• double 15 " subwoofer enclosure
• front. & rear- loaded optimized S.I.C. design
• very high power
• sophisticated electronic built-in protection
• high power handling
• low thermal compression
• maximum efficiency bandwidth volume
• compact dimension
• optimized for 35 - 200 Hz Bandwidth

A P P L I C A T I O N S

For use with PULZ® loudspeakers, the signal is provided by PULZ® analog controllers. Alternatively, recommended factory presets for digital processors are available With power handling capacity of 1600 W (4000 W peak) and response to 35 Hz, the Sub215S is the answer for applications requiring additional low frequency extension at high SPL from a compact enclosure. The Sub215S provides low end extension and upper mid bass articulation combined with very high power handling and efficiency. Due to its SIC design, multiple Sub215S enclosures couple effectively while providing the bass definition and musicality that only a larger front loaded subwoofer can provide. The compact dimensions of the Sub215S provide a high degree of versatility for installations where space is at a premium. Typical applications include distributed subwoofer systems for club, open air systems or concert halls

sub 215 | S P E C I F I C A T I O N S

features

Frequency range (± 3 dB) 35 Hz to 200 Hz

Sensitivity @1W 1m, f > 30 Hz103 dB SPL

Maximum continuous level at 1m, f > 30 Hz133 dB SPL

Peak level at 1m, f > 35 Hz139 dB SPL

components

Transducers2 x 15" weatherproof loudspeaker

Type of load Single Interactive chamber

power

Recommended amps1000 to 2000 W into 8 Ohms

Peak4000 W

AES1600 W

construction & characteristics

Cabinet15mm plywood with internal reinforcements

Finish Gray, impact resistant structured coating

Protection grill Acoustically transparent perforated steel, 1.5mm thick

Grill back-up Gray, woven, heavy duty fabric

Connectors2 x SPEAKON NLM4P

Handles3 x built-in steel bar

Mounting on stand1 x 35 mm built in stand fitting

Dimensions (H x W x D) 17.72’’ x 32.28’’ x 23.6’’ (450x 820 x 600 mm)

Net unit weight40 kg

Gross weight, packed45 kg